Số 2 Ngô Quyền, Hoàn Kiếm, Hà Nội hungpv@haphongjsc.com
Hotline: 0904 918 479
Logo YaskawaViệt Nam

MP3200iec

ControllersYaskawa

MP3200iec

  • IEC61131-3 and PLCopen programming standards
  • MECHATROLINK-III as the motion network
  • 0, 3, 5 or 8 slots for option modules
  • 4, 8, 16, 32 or 62 motion axes

MP3200iec controller Features

Communication Protocols

  • Open standards EtherNet/IP and Modbus/TCP for connectivity to many peripheral devices on the market.

Standard Programming Languages

  • IEC61131-3 means that programs are developed and executed with predictable behavior.

Programmable Amplifier Outputs

  • The controller can operate local Sigma-5 outputs. This reduces panel cost and space requirements when just a couple of outputs are necessary.

Controller-Centric Commissioning

  • The MECHATROLINK motion network provides a channel for configuring the machine from a single location with one software tool.

A Multitude of Options

  • Choose from eight option cards offered for the expansion slots to accommodate most machine requirements.

Remote I/O

  • Numerous third-party remote I/O modules such as Phoenix, Wago, and Opto 22 can be interfaced with the system via MECHATROLINK and Ethernet.

Web Server

  • A built-in web server offers standard controller diagnostic information eliminating the need for special software for maintenance personnel

RS-274 G-code available with all Yaskawa kinematic libraries

  • 4 degrees of freedom (MP3300iec-ER and 5-Axis Simultaneous Control Toolbox required for full 6 degrees of freedom)
  • Linear interpolation, circular interpolation, and tangent following
  • Work coordinate system offset and tool offset
  • Pause, continue and feed-rate override

MP3200iec controller Specifications

Item
Specifications
Model Number PMC-U-MP32004 CPU module, MP3200iec, 4 axis
PMC-U-MP32008 CPU module, MP3200iec, 8 axis
PMC-U-MP32016 CPU module, MP3200iec, 16 axis
PMC-U-MP32032 CPU module, MP3200iec, 32 axis
PMC-U-MP32062 CPU module, MP3200iec, 62 axis
Supported Modules LIO-01, LIO-02, LIO-04, LIO-05, LIO-06, AI-01, AO-01, DO-01
Software MotionWorks IEC Express
MotionWorks IEC Pro
CPU PowerPC 1 GHz
Number of option module slots 0, 3, 5 or 8
User Variable Memory 52 MB
Input Voltage Input Voltage: Two options available: 24VDC or 100/200 VAC
Input Current Input Current: DC power: 5.0A, AC power: 4.0A (at rated input/output fully loaded with option cards)
Battery Battery: Battery for memory retention attachable at the bottom of the CPU unit
Motion Network MECHATROLINK-III: 1 channel, 2 connectors
SERVOPACK and I/O for up to 62 slave nodes connectable
(SERVOPACK for up to 62 axes)
Baud rate: 100 Mbps (MECHATROLINK-III)
Communication Function Ethernet: 10Base-T or 100Base-TX x 2 ports (hub)
Ethernet Protocols Ethernet/IP and Modbus TCP/IP standard on all units, User specific protocols can be written using Y_DeviceComm firmware library
Calendar Seconds, minutes, hour, day, week, month, year, day of week, and timing (battery backup)
Environmental Conditions Ambient Operating Temperature: 0°C to 55°C
Ambient Storage Temperature: -25° to 85°C
Ambient Operating Humidity: 30% to 95% (with no condensation)
Ambient Storage Humidity: 5% to 95% (with no condensation)
Pollution Level: Pollution level 1 (conforming to JIS B 3501)
Corrosive Gas: There must be no combustible or corrosive gas
Operating Altitude: 2,000 m above sea level or lower
Mechanical Conditions Vibration Resistance: Conforming to JIS B 3502:

  • 10 to 57 Hz with single amplitude of 0.075 mm
  • 57 to 150 Hz with fixed acceleration of 9.8 m/s2
  • 10 sweeps each in X, Y, and Z directions (sweep time: 1 octave/min.)

Shock Resistance: Conforming to JIS B 3502:
Peak acceleration of 147 m/s2 (15 G) twice for 11 ms each in the X, Y, and Z directions
Electrical Operating Conditions Noise Resistance:
Conforming to EN 61000-6-2, EN 55011 (Group 1, Class A)
Power supply noise (FT noise): 2 Kv min., for one minute
Radiation noise (FT noise): 1 Kv min., for one minute
Installation Requirements Ground: Ground to 100 Ω max.Cooling Method: Natural cooling
Connectors M-III: MECHATROLINK, 2 connectors
Ethernet: RJ 45: Ethernet, 2 connectors
RLY OUT: RLY OUT connector
Serial: HDR-EC14LFDTN-SLE+ (HONDA)
USB: DUSB-ARA42-T11A-FA (DDK), type A connector
Indicators RDY(green), RUN(green), ALM(red), ERR(red), BAT(red), M-ALM(red)
Switches STOP, E-INIT, INIT, CNFG, LOAD, D_RST, E—PM0, E-PM1, TEST and MNT
Dimensions 120 mm X 130 mm X 105 mm (W × H × D)

Sản phẩm liên quan

Panel PC

Panel PC

Panel PC Panel PC With the Panel PC series, you are best equipped for all control and monitoring tasks. The combination of industrial PC with the most modern performance features a

Xem chi tiết →